The New Arch | Tech

Eddy, Phil and James are proud to announce a new address for the Architecture | Technology blog: architecture-tech.com  The old address (architechure.blogspot.com) will still function for awhile until our provider phases it out and it redirects to the new site.
Along with the creation of this new domain, we have a new email address for tips, suggestions and commentary on our upcoming book: Click here

Feel free to drop us a line and share your thoughts.

PLUS

Midway reminder

It's Feb 15th which means we're about 1/2 way through the month and 1/2 way through our requests for your best Revit tips. If you haven't seen this yet, take a look.

Offer only good while supplies last.
Not available in stores.

Friday Reprieve #19

Just a little binger to brighten your Friday. If you're like me, it's cold, grey, and icy. Which means you can't bike. Which is always a bummer. So, in the dull drums of winter, I've found this most excellent bike website. Rapha. It's what Apple would be if they sold bicycles. Purely glorious. You're not buying a bike, you're buying into the lifestyle and the brand. (Cyclist is the one on the bridge. that little dot. probably carrying an iphone)


What's funny about that? Nothing. But I like it and I wanted to share, so stick it.

However, if you're looking for the joke here I've found this other blog clearly written by the children of modern architects. Why the children of them? Because if you read between the lines, they must have been strict modernist, elitist architect parents - maybe even as bad as studio professors - to raise a child who thinks this way. Welcome the Unhappy Hipsters.

Mastering Revit: Walls, Floors and Roofs

As the snow falls in the Northeast today, I’m still churning out high quality content for Mastering Revit Architecture 2011. Now, don’t get me wrong…the editing process isn’t for the faint-hearted or those with weak intestinal fortitude.  Last night was a long night of writer’s block and a complete redeux on one chapter’s development edits - “but then, in the midst of my preparations for hari kari, it came to me”…the throngs of gurus and wizards in the global Revit community!  We continue to seek your input to make this tome the best source of valuable Revit knowledge to date. 

From my desk so far, I have drafted Templates and Standards, Working with Consultants (Revit-to-Revit), and Interoperability: Working Multiplatform.  The next few chapters on my plate cover complex modeling of Walls, Curtain Walls, Floors and Roofs.  As the outlining process is just beginning for me, I’d love to hear suggestions from any of our readers.  If you have some frustrations, success stories or even some wicked cool samples, please drop us an email at:

masteringrevit AT architecture-tech.com

Thanks Dave!

It was exactly nine years ago today I started my first day of work at a start-up-that-would in Waltham, Mass.

Want to know what's scarier than finally working up enough courage to ask your wife if it'd be okay to go to work for a little known (and much maligned by the mainstream) technology start up?

When she immediately replies, "Well - you love technology and architecture and you're convinced this software is the future. So you have to do this. Because if you don't, you'll never know what could have been."

And if you guys think Revit is cool, wait till you see what's behind curtain number two. Cause in a little while, things are going to get very, very interesting. I'll put it this way: if your first impression of Revit created a definable sense of well-it's-about-time joy, this is gonna restore your sense of child-like wonder.

Seriously. :)

Don't Push That Button

Especially if your iPhone is unlocked (via DevTeam|Pwnage or GeoHot|Blackra1n) - it'll kill your unlock and jailbreak.

You have been warned.

Think Different

Spot the difference.

Wrong - it's not that different. ;)

Quoth Du Jour:

"Man isn't a noble savage, he's an ignoble savage. He is irrational, brutal, weak, silly, unable to be objective about anything where his own interests are involved—that about sums it up."

- Stanley Kubrick

Game On

So, the three of us are feverishly working, slaving away on content for the 2011 Mastering book. Phil was working it so hard that his laptop flickered out into nothingness. It blew a gasket. Or a video card, depending on your point of view. Regardless, he still managed to pound out 56 illustrious pages on Stairs and Railings. A must read for any Revit aficionado.


While we might be self-stylized gurus, we do recognize that we don't know it all. (although we'd never admit that publicly). So to you, the four readers of this blog, we offer the following contest:

We'd like your best Revit tip. If you voted Obama, think of this as a socialist outreach to better humanity through a collection for the common good. If you read 'Going Rogue' and not for irony, think of it as us trying to get free sh*t out of you.

Here's the deal: For the month of February, email your best Revit tip to MasteringRevit@architecture-tech.com. If we use your tip in the book, we'll give you props for it (so make sure to include a name, firm name, and blog if you have any of those). And the absolute best tip gets a free copy of the book. Signed by Phil in red ink - just like Marlyn Monroe.

Careful With Predictions

Like this one about the iPod.
Or this one about the iPhone.

The iPad is an answer to a lot of questions that people haven't asked. Never mind the tech blinded savvy cynic end users that want the next heavy processor ram battery brick portable multitasking workstation and as a result see the glass as (less than) half-full because the iPad sucks at being that kind of computer. A hundred years ago, these sorts scoffed at motor-cars because they wanted better horses. And these sorts will scoff at people who "lemming-like" stand in uberlines to buy an iPad.

Well, they'll scoff until they're compelled to buy one next Christmas for their wives, kids and their kid's grandparents.

The iPad isn't a computer. Nor do think it's designed to be one (any more than the iPod and iPhone). Rather, it's a complimenting - not a competing - device. It's something else. And this is important if you're Apple (or an Apple shareholder) and in the business of selling hardware. Apple isn't asking their users to choose another computer. Their asking their customers (and more importantly - a lot of new customers) to approach the internet from another point of view. So I suspect when people finally get to experience one - they'll realize it's not a computer and not meant to be. But it won't matter. It's something else that's very compelling. And they'll probably want one.

I think it's a vertical integration of a lot of devices: handheld gaming, DVD players, web browsing and email, etc.

I think it'll be popular with kids; look for books, homework, painting/drawing, school and learning focused apps and movies in the backs of minivans.

I think it'll be popular with teenagers as a collaborating, communicating device at home and school; media, music, video, Facebook, blogging, idea sharing, idea presenting, note taking and beats the heck out of carrying around a backpack full of books. And because it'll be a compelling status symbol.

I think it'll be popular with parents and their parents. People who don't want or need another laptop. But still want to be able to "get to their stuff".

I think it'll be popular with grandparents that don't want or need a net book - but want a rich, portable, user friendly, media web based experience. Plenty of on-board storage and plenty more in the cloud.

I think it'll be popular with road warriors: email, reading, podcasts, video, note taking, ideating, twittering and presenting.

I think it'll be popular with developers that want to create cloud-based thin clients and purpose focused tools.

I think it'll be popular with Apple share holders.

The iPad isn't a computer. Nor is the iPod. Nor is the iPhone. And no one else is making anything like it. And like the iPod and iPhone - other people will try. And just about the time they get it right (maybe...ahem...Google Android...cough) Apple will have come along and redefined the paradigm.

That's my prediction.

it's not easy being green

Interesting article on green space in city parks. Based on a recent study, some of those green spaces actually produce more carbon than they offset. Sadly, various city maintenance practices of mowing (fossil-fuel powered mowers), irrigation (fresh water sources), and fertilizer make for a very large carbon footprint.
While the use of green lawn care can be seen as extreme by some, why is sustainability such a hard nut for people to crack? However, there are plenty of surrounding buildings in an urban landscape that can be used to catch and hold water for irrigation and composting all the leaves, grass clippings and sticks would make for good fertilizer. Simply adding grass doesn't = green.

Mining for Gold

To catch you up:
I found a house needing major renovation in December of 2008. Designed it over the winter, officially purchased it Jan 27th, 2009, began work Feb 1, moved in June. 1236 sq ft, 2 story brick. We wanted to go LEED for Homes, which was out of beta and new to the market in January 2009. So begins our journey:

While we’ve been living in the house now for about 6 months, we’re still working with the USGBC on our LEED paperwork. And by ‘working with them’ I mean ‘arguing with them’. We are down to only a few remaining points and we’re in a solid Silver category. The goal was to see how far into LEED we could get without spending any extra $$ beyond the design. Now, honestly didn’t make that 100% - we had to spend a bit of cash on LEED fees, but it’s been fairly minor. If you’re not familiar with LEED for Homes, there’s a number of self-promotional points you can get. There’s a point for putting a sign in your yard stating you’re a LEED home, there’s a point for education, there are points for other silly things (IMHO) that help LEED promote and don’t do much for the environment. At this point, I’ve managed to design and build and move into the house in ½ the time it’s taken to work on LEED. I can’t imagine going to a client and stating that the design will cost you X, and LEED for Homes will be X*2.

So, our latest debacle is LEED Credit SS 2.1: No Invasive Plants. Let me quote you the entire requirement: “No invasive plants. Introduce no invasive plant species into the landscape.” Seems pretty easy, no? We didn’t do any landscaping (beyond a plan) so I figured this pre-req was a no-brainer. Let me share my recent conversation with LEED:

LEED: You still haven’t shown documentation for SS2.1

Eddy: I haven’t performed any landscaping. Logic would assume that since there was no landscaping – not even any land disturbance, there are no invasive plants introduced into the site.

LEED: We need to see documentation that is required.
Eddy: In reading SS 2.1 it only states No Invasive Plants and doesn’t state anything about any documentation.

LEED: We can’t award the pre-req without documentation.

Eddy: The pre-req doesn’t list any documentation. It is 2 sentences long. I have no idea what to provide to prove that I didn’t do anything. Can I submit a log of spending some time on the couch in lieu of gardening?

LEED: We are requiring a list of invasive plants for your area.

Eddy: Where is that required? I don’t see it listed anywhere.

LEED: I just told you.

Eddy: via email response: http://www.easywildflowers.com/invasive.htm

Lightning Fast Robot Hand

Robotic construction?...maybe.  Really cool?...definitely!

Tweeted by my friend Ajmal over at core.form-ula, this is an amazing look at the progress in robotics at the Ishikawa Komuro Lab in Tokyo.  Watch as a robot hand can throw or dribble a ball, toss a cell phone in the air and catch it with precision and tie knots in a rope.

High-Speed Robot Hand

Friday Reprieve #18

Solicitation Number:
GS-08P-10-JA-P-0011
Notice Type:
Special Notice
Synopsis:
Added: Dec 14, 2009 5:43 pm Modified: Jan 11, 2010 5:08 pmTrack Changes

RECOVERY - It is the intent of the General Services Administration (GSA), Public Buildings Service (PBS) to negotiate on a sole source basis with Roe Ecological Services, LLC under the authority of FAR 6.302. This proposed acquisition will provide for the humane removal of prairie dogs from Land Area 6 of the Denver Federal Center.

Live trap prairie dogs and promptly euthanize the same day.

• Prairie dogs must be euthanized humanely. The contractor may not use vacuum, flushing, foaming, or any other method to extract prairie dogs which causes undue emotional duress and/or physical damage (internally or externally).
• Euthanized prairie dogs must be transported off site and delivered to the Colorado Raptor Program in Fort Collins, CO, where they will be used as food for captive raptors being rehabilitated.
• Contractors shall be certified as an acceptable prairie dog donor by the Colorado Raptor Program prior to the closing of this special notice. A written acceptance from the Colorado Raptor Program must be included with the capabilities and qualifications statement as noted below.
• Prairie dogs must be euthanized in a manner that ensures non-target wildlife will not be euthanized and/or harmed.

What made this particularly funny was that when this was going through our office, someone misread 'raptor' for 'velociraptor'. The next logical assumption made within the office was that the government was using stimulus money to create a velociraptor farm in Colorado which was eventually going to bring about the same demise as Jurassic Park. Fortunately, the misreading was corrected and the world is again safe from rogue velociraptors.

Mastering Revit - Interoperability

It's time for another chapter update in Mastering Revit.  I am developing the content covering Interoperability and would like to get your feedback.  First, please click the link below to launch a short survey...

Click here to take survey

I am excited about developing a chapter dedicated completely to the aspects of interoperability - and not just the 'picks and clicks' - but the real world scenarios and why you would use one method over another. In this chapter, I'll be writing about:

• 2D plan data for conversion to Revit
• Coordination of 2D data (furniture, lighting layouts, etc.)
• Use of CAD details
• Imported 3D data for massing/faces
• Imported 3D data for custom element geometry
• IFC import and export
• DWF design review workflow

Let me know what you think about these topics.

Off to the Races

In December we started working on the new tome, Mastering Revit 2011. work has been progressing nicely over the last month and a half. We’ve been pounding out content getting organize and arguing over who’s name gets to be first on the book cover. As with any project, this is a work in progress, but we wanted to share the current iteration of our Table of Contents. This is version 10, and I’m sure there will be a version 11 and a version 52, but this should give you an idea of the kind of content we’re looking to create. See anything we missed in there?

Stay tuned for previews of some of the upcoming work as we continue flushing out the chapters.


FUNDAMENTALS
Principles of Revit - Tools and UI
The Basics of the Revit Toolchest

UNDERSTANDING THE REVIT WORKFLOW
Templates and Standards
Managing a Revit Project
Understanding Worksharing
Working with Consultants
Interoperability - Working Multi-Platform

MODELING AND MASSING FOR DESIGN
Advanced Modeling and Massing (Inter / Intra Revit)
Conceptual Design and Sustainability
Designing with Design Options and Groups
Visualization (Still, Moving, Real Time / Game Engines)

ADVANCED MODELING TECHNIQUES
Complex Walls + Curtain Walls
Complex Roofs and Floors
Stairs and Railings
Family Editor

DOCUMENTATION
Documenting your Design
Detailing your Design
Annotating the Design
Presentation Materials (color fills, area plans, etc)

CONSTRUCTION
Contractor and Revit
CA and Revisions

BEYOND CONSTRUCTION
Revit in the Classroom (High, College, Graduate, Training)
Virtualization
Under the Hood (API, Journal Files, Hacking, UI, Scripts)
Direct to Fabrication
Out of the Box - Fabrication / Film and Stage / Etc

The Third & The Seventh

A fellow Autodesk forum member posted a link to the following short film by Alex Roman featuring Louis Kahn's Exeter Library. Watch the video, then be amazed at how it was created by viewing the Compositing Breakdown video that follows. Fantastic technology, art and architecture.

The Third & The Seventh from Alex Roman on Vimeo.

---

Compositing Breakdown (T&S) from Alex Roman on Vimeo.

Happy (cold) New Year

I don't know about many of you, but it's been a pretty cold New Year here in Kansas City. The current temp here is a whopping 3 degrees (F). It's unseasonably cold and from the weather forecast, it looks like it's going to stay this way for the foreseeable future. While sitting around over the holidays catching up on my sleep, I found a great blog written by a NY Times editor. It's called Dot Earth. They talk about all of those things that only 66% of bloggers on this blog actually believe in: Global Warming. The author just did a great piece on arctic air temperatures, their trends over the past 50 years and how this is looking like it will be the coldest winter on record. See that little blue dot at the bottom right? That's us in 2010.

While I've been unable to confirm it, I'm positive that Phil got a copy of 'Going Rogue' for christmas so I had to get my 'hippie tree hugging' plug in first.

Update: Hundreds protest global warming in the midwest:

AU - the numbers are in

A warm thanks on a cold day to all of you who attended my class on Daylighting at AU. An even warmer thanks to those who helped to vote it into the top 100 classes at AU in 2009. I am sure it was for my avante guard presentation techniques and my use of parametric sock puppets to demonstrate what good daylighting design can do using 3ds Max.
For those of you who missed it, there's a handy link on this blog to the webcast for the class as well as for Phil's on stairs and the use of Revit in the movie industry.
And for those of you who missed AU entirely, make your plugs now to attend next year, but get in shape first. After 3 days of walking, I broke down and bought this iPhone app to calculate my steps. I felt like I'd been walking miles. I tracked the steps one day from my hotel room door (the hotel at the conference) to the conference hall.
That's 957 steps, door to door. If you can't see it, that's also 0.45 miles. one way. That is also without ever setting foot outside.

Happy Holidays

Thoughts on Integrated Design

In 2006, Bob Berkebile, FAIA, Laura Lesniewski, AIA and myself co-authored a paper on sustainable design + BIM for the 2006 AIA conference on Integrated Practice. We examined "what the authors characterized as the ultimate design challenge, integration between nature and human nature, between the built and natural environments, and also technology."
There were 10 papers that were presented during that conference and now, 3 years later the AIA is touching base with all the authors of the different papers to see if their views had changed. One by one, they are interviewing the authors and presenting their works as podcasts. Other authors include Thom Manye, Robert Smith, Markuu Allison, and Chuck Eastman. It's good stuff.

Find them here.

Ours is released this Friday.

Mastering Revit - Templates

As we begin our journey in re-writing "Mastering Revit Architecture," we would like to gather as much feedback as possible to make the 2011 version the best yet. My first chapter will be covering Revit Templates and I have created a short online survey to gather feedback from our readers. Please feel free to click the link below to participate or leave your comments here on our blog.

Click here to take survey

Video Killed The Radio Star

Screencasts are posting for AU2009. The links on the right side of this page will send you to the sessions presented by yours truly and Eddy Krygiel (registration required). You can watch them online or download for offline viewing (in WMV format). As an added bonus, I've also converted and uploaded the offline files to M4V, which is suitable for playing in iTunes - which you can also sync with your iPod and iPhone.

It's all about the customer.

Anyway, Justine recons I'm using a radio voice...which if you think about it, is a nice way of saying I've got a great face for radio. ;)

A Changing Of The Guard

For those of you who attended AU, you might already know this. But for the rest of you......

I've been writing the Introducing Revit and Mastering Revit books with Greg Demchak and Tatjana Dzambazova for the past three years. Due to circumstances beyond the control of mere mortals, there is a changing of the authoring team in the works. I won't go into the semantics but the authoring team formerly known as Greg, Tanja and Eddy has been disbanded. I wish my old authors luck. They are good people, good friends, and passionate Revit users. The Introducing Revit 2011 series will be carried forward by a new author, yet to be determined.

The Mastering Revit 2011 will have a new look as well. The new team will be the trio of this blog: Phil Read, James Vandezende, and Eddy Krygiel.

When the book was started three years ago, it was primarily structured as an appendage to Introducing as not all of the material could fit into only 400 pages. But in the past 3 years so many people have gained such expert knowledge of Revit, we felt it was time to rework the book from scratch. The new book will be geared towards more advanced content taking the use of Revit to the next level.

As we work diligently to create new and interesting content (and teach Phil to use the Ribbon) we're hoping to post some of the new tome for your feedback and comments. We've even gone as far as discussing sending Beta copies of the book to the Revit development team. Call it Karma if you will.

'Tis the season

Welcome back from AU. Upon my return to KC, the temperature dropped about 40 degrees and after looking at my calendar, I noticed it is apparently December. That means Christmas is just around the corner. Only 20 shopping days remaining! As I try to figure out what to get this season for my 10 and 13 year old girls, I happened upon a website that has nothing to do with BIM, sustainability, my growing hate of the LEED process, or anything involving ribbons. It's all about Christmas. Or, more specifically, what NOT to buy for Christmas for your kids. Seriously. Check it. It's good for a good smile, good to be offended as a parent, and good to know the toy companies are out there with your kid's best interests at heart. Here a teaser:

The fish fillet game.

Seriously, how can you go wrong??? PS. Make sure to click through enough to get to the Elmo doll that makes death threats when you replace it's batteries.

And to the 75-100 of you who joined us at the MiX on the 64th floor of the Mandalay Bay, wearing your T-shirts, a heart-felt THANK YOU. It was a space with a killer view and a rockin' good time. Maybe we can make this an annual event. We'll have to see what happens to the ribbon in 2011. :)

Remember, what happens in Vegas gets posted on YouTube.